Kuvaus
GSM communicator compatible with Paradox, DSC, Caddx, Pyronix and other manufacturer control panels, reading messages directly from control panel’s DATA BUS
Module features:
- Support for three alternative communication modes:
- 3G
- GPRS
- SMS
- DTMF via GSM voice channel
- Module transfers all messages from indicated control panels in Contact ID protocol
- Can operate with all other control panels on the market, when using external interfaces C11, C14 or CZ6
- Messages are transmitted through GPRS to the main or backup IP addresses. If GRPS connection is lost, messages are sent with SMS messages
- Constant control of connection with ARC
- Port for connecting an additional VHF/UHF, Ethernet or GSM transmitter
- Remote control of output OUT1 status
- Information about events to users with SMS messages
- Quick and easy configuration via USB
- Access to module configuration is secured with two level password
- Remote configuration, control and update from ARC
- Module can be factory locked to one security company
- Metal casing for additional mainboard protection
Specifications
Inputs (IN1-‐IN2) | 2 x NC type |
PGM outputs (OUT1) | 1 x OC type, switching 30 V, 100 mA |
Connection with the main IP receiver | GPRS, SMS or DTMF via GSM |
Connection with the backup IP receiver | GPRS, SMS or DTMF via GSM |
Communication via GPRS | TCP/IP or UDP/IP protocol |
Alarm messages encoding | In Contact ID |
Alarm messaging to consumer | SMS with pre-‐set customized text to 4 mobile phones |
Memory | 60 last events |
GSM modem | Dual-‐Band 900/1800 MHz |
Power supply | DC 12,6 V, 10-‐15 V |
Current | Idle running 60 -‐ 100 mA, within transmitting up to 250 mA |
Operating temperature range | From -‐10 °C to +55 °C, when relative air humidity 80 % with 20 ºC |
Dimensions | 85 x 65 x 25 mm |
Weight | 0,1 kg ARC – Alarm Receiving Centre |
Data Bus Compatible with
PARADOX | Spectra series: SP5500, SP6000, SP7000, 1727, 1728, 1738 – Magellan series: MG5000, MG5050, DIGIPLEX: EVO48, EVO192, EVO96, NE96 – Esprit series: E55, 728ULT, 738ULT |
DSC | Power Series: PC1616, PC1832, PC1864 PC585, PC1565, PC5020 |
PYRONIX | Matrix Series: MATRIX 424, MATRIX 832, MATRIX 832+, MATRIX 6, MATRIX 816 |
CADDX | NX-‐4, NX-‐6, NX-‐8 |
SECOLINK | PAS832 |
Communicator G10 is compatible with other manufacturer control panels when connected with interfaces (C11, C14 or CZ6) or by using GSM communicators G10T or G10C.
Arviot
Tuotearvioita ei vielä ole.